**銷售parker齒輪泵,派克齒輪泵原理
如果您對該產品感興趣的話,可以
產品名稱: **銷售parker齒輪泵,派克齒輪泵原理
產品型號:
產品展商: PARKER
產品文檔: 無相關文檔
簡單介紹
**銷售parker齒輪泵,派克齒輪泵原理
帶有兩個軸（G101）的型號可安裝到遠程PTO上，可在任一旋轉方向上運行。
單軸（G102）直接安裝到車輛傳動系統系。
派克液壓馬達****：效率*、真正的磨損補償和更長使用壽命。
**銷售parker齒輪泵,派克齒輪泵原理
**銷售parker齒輪泵,派克齒輪泵原理
的詳細介紹
**銷售parker齒輪泵,派克齒輪泵原理
派克全系列*速及低速液壓泵可提供的功率范圍：其扭矩達15,000ips（1695Nm），
轉速范圍介于0.5rpm至13,000rpm。涵蓋外齒輪、擺線、葉片及柱塞類型，
可提供完整的規格范圍。定量及變量型式都可提供。
Provide reliable performance, pressure balance side panels ensure maximum efficiency,
resistance to contamination, suitability / repeatability under all operating conditions.
All pumps are factory equipped with 2000psi safety valve.
In addition, they also have a durable iron
structure and long life of the roller bearings, and has a good suspension load capacity.
我們的卡車泵產品為可以工作在1800rpm/2000psi下。
Parker full range of high-speed and low-speed hydraulic pump can provide the power range: the torque up to 15,000ips (1695Nm)
The speed range ranged from 0.5 rpm to 13,000 rpm. Covering external gears, cycloid, blades and plunger type,
Can provide a complete range of specifications. Quantitative and variable types are available.
這些型號可連接在2或3系統油路中以控制單作用油缸。
提供可靠的**，壓力平衡側板確保在所有運行條件下的效率，耐污染能力，適用性/重復性。
所有泵均出廠時配置有2000psi的安全閥。
除此之外，它們還具有耐用的鐵結構和長壽命的滾柱軸承，并具有良*的懸掛負載能力。
Parker hydraulic motor performance: high efficiency, real wear compensation and longer service life.
Our truck pump products can work at 1800rpm / 2000psi.
Models with two axes (G101) can be mounted on a remote PTO and can be operated in either direction.
Uniaxial (G102) is mounted directly to the vehicle drive system.
These models can be connected to 2 or 3 system lines to control single acting cylinders.
**銷售parker齒輪泵,派克齒輪泵原理
